SpiraPlan: REST Web Service (v5.0)

How To Access The API

Using the Right URL

To access these REST web services, you need to use the specific URL of the application.

For instance, if you access the application in the browser from https://companyname.spiraservice.net, then that will be the base of the URL used for accessing the API. And if you are on version 5, the API URL would be: https://companyname.spiraservice.net/services/v5_0/RestService.svc

If you are viewing this page from your application, the base URL is:

https://api.inflectra.com/Spira/Services/v5_0/RestService.svc/

Specifying The Data Format

You can specify the format of data that will be returned (XML or JSON) by passing the following HTTP Headers:

  • Content-Type: application/xml - Sends data in XML format
  • accept: application/xml - Returns data in XML format
  • Content-Type: application/json - Sends data in JSON format
  • accept: application/json - Returns data in JSON format

Note: when sending data to Spira, make sure all tags are sent in alphabetical order

Authentication

There are three different ways to authenticate with the web service. They all need a username and an api-key. The api-key used is the same as the RSS token created by the application. You can find a user's RSS token by either going to the user profile (either by visiting your own profile page, or accessing it via the administration panel). If no RSS token is shown for a user, make sure "Enable RSS Feeds" is set to yes.

Copy the full RSS-token / api-key for the relevant user--including the curly braces { }. In the below examples the username "fredbloggs" is used, with an api-key of "{XXXXXXXXXXXXXXXX}"

  1. Append the username and application API-Key as an extra querystring parameter:
    ?username=fredbloggs&api-key={XXXXXXXXXXXXXXXX}
  2. Pass in the username application API-Key using the username and api-key HTTP headers:
    username: fredbloggs
    api-key: {XXXXXXXXXXXXXXXX}
  3. Pass in the username and api-key using the standard HTTP basic authentication header:
    Authorization: Basic XXXXXXXXXXXXXXXXXXXXXXXXXX
    where XXXXXXXXXXXXXXXXXXXXXXXXXX is username:api-key base64 encoded

Accessing Across Domains

If you need to send or receive information from a web page in another domain you need to use CORS. This protocol verifies that the domain requesting the information is one that the application accepts. This can be set in Spira's security settings in its administration.

Gotchas

  • URL parameters: make sure to always specify all required parameters. Where 'null' can be passed in before the query string part of the URL (before the ?) use a space to represent null. To enter null after the query string, simply omit the parameter
  • Headers: make sure to specify the correct headers for the format required - eg XML or JSON
  • Accepted Verbs: some internal networks can restrict specific verbs (eg PUT) or blacklist certain API calls. If you get no response to an API request, check all relevant logs to trace the problem
  • Posting: we provide sample object structures for each relevant POST request. These often have null values or 0 for their keys. Do not send these values. Only fields containing data need to be included in the POST body.

Example REST Call

When starting to try out the API we recommend starting with a simple GET request, to make sure the connection is working as expected.

A good first API call to make is to get a list of all projects the user connecting via the API has access to. To make this call we need the following information

  1. The base url for accessing the service (for this current application it is https://api.inflectra.com/Spira/Services/v5_0/RestService.svc/)
  2. The additional query string to get the list of projects (projects)
  3. The username of a user with sufficient access to the system (let's use Fred Bloggs)
  4. The API-key for that user (in this case, let's assume it's {XXXXXXXXXXXXXXXX})
  5. Finally, we need to decide what form we want the information to be sent to us in (we will ask for JSON here)

Putting that all together we can create the URL we need. If we put the authentication into the URL, the full URL will be:

https://api.inflectra.com/Spira/Services/v5_0/RestService.svc/projects?username=fredbloggs&api-key={XXXXXXXXXXXXXXXX}
with a header of accept: application/json

Artifact Types and their IDs

In a number of API calls you can link one artifact to another (artifacts are things like documents, requirements, test cases). To do this you will need to know the ArtifactTypeId of the relevant artifact(s). Below is a list of all artifacts in SpiraPlan (these are not all available in SpiraTest or SpiraTeam

  • Requirement = 1
  • TestCase = 2
  • Incident = 3
  • Release = 4
  • TestRun = 5
  • Task = 6
  • TestStep = 7
  • TestSet = 8
  • AutomationHost = 9
  • AutomationEngine = 10
  • RequirementStep = 12
  • Document = 13

Resources

This table provides a list of all the resources exposed by this REST web service. More detail about each resource is explored after this table: Export as WADL-JSON

ResourceMethodsDescription
Artifact Documents GET , POST , DELETE This resource lets you view/add documents associated to an artifact
Association POST , PUT , GET This resource lets you create, view and update artifact associations
Automated Test Run POST , GET This resource allows you to retrieve, create, modify and delete automated test runs in a specific project in the system.
Automation Engine GET , POST , PUT This resource lets you create, and view automation engines in the system
Automation Host GET , POST , PUT , DELETE This resource lets you create, view, update and delete automation hosts in the system
Component POST , PUT , DELETE , GET This resource lets you create, edit, delete and view components in a project
Custom List GET , POST , PUT This resource allows you to retrieve and edit the custom lists defined in a specific project
Custom List Value POST This resource allows you to add custom list values to a custom list in a project
Custom Property GET , POST , PUT , DELETE This resource allows you to retrieve and edit the custom properties defined in a specific project
Data Mapping Artifacts GET , POST , DELETE This resource lets you create and retrieve the data mapping for artifacts
Data Mapping Custom Properties GET This resource lets you view the custom property data mappings
Data Mapping Custom Property Values GET This resource lets you view the custom property value data mappings
Data Mapping Field Values GET This resource lets you view the standard field data mappings
Data Mapping Projects GET This resource lets you view the project data mappings
Data Mapping Users POST , GET This resource lets you view and add user data mappings
Data Sync GET , POST , PUT This resource lets you retrieve the data synchronization plugins configured and update the synchronization status
Data Sync Event POST This resource lets you record events in Spira from data-synchronization activities
Document GET , POST , DELETE This resource allows access to the document attachments in the system
Document Folder GET , POST , DELETE , PUT This resources provides access to the active document folders in the project
Document Type GET This resources provides access to the active document types in the project
Document Version POST This resource lets you add new versions of documents
History GET , POST This resource lets you view the history of changes made to artifacts
Incident GET , POST , PUT , DELETE This resource allows you to retrieve, create, modify and delete incidents in a specific project in the system.
Incident Comment GET , POST This resource allows you to retrieve the comments associated with an incident as well as add new comments to an existing incident.
Incident Priority GET , POST This resource allows you to retrieve/create incident priorities defined in a specific project
Incident Severity GET , POST This resource allows you to retrieve/create incident severities defined in a specific project
Incident Status GET , POST This resource allows you to retrieve/create incident statuses defined in a specific project
Incident Type POST , GET This resource allows you to retrieve/create incident types defined in a specific project
Manual Test Run POST , PUT , GET This resource allows you to retrieve, create, modify and delete manual test runs in a specific project in the system.
Message GET , POST , DELETE This resource lets you receive and send instant messages
Project GET , POST , DELETE This resource allows you to retrieve projects in the system
Project Role GET This resource lets you view the list of project roles in the system
Project User GET , POST , PUT This resource allows you to retrieve and modify the users associated with a specific project
Release GET , POST , PUT , DELETE This resource allows you to retrieve and manage the releases and iterations defined in a specific project
Release Build GET , POST This resource lets you create, and view automated builds in the system
Release Comments GET , POST This resource allows you to retrieve the comments associated with a release as well as add new comments to an existing release.
Release Status GET This resource lets you retrieve the list of release statuses in the system
Release Test Cases POST , DELETE , GET This resource lets you retrieve, add and remove test cases to/from releases
Release Type GET This resource lets you retrieve the list of release types in the system
Requirement GET , POST , PUT , DELETE This resource allows you to retrieve, create, modify and delete requirements in a specific project in the system.
Requirement Comment GET , POST This resource lets you retrieve and add comments to a requirement in the system.
Requirement Status GET This resource lets you retrieve the list of requirement statuses in the system
Requirement Step GET , POST , PUT , DELETE This resource lets you create, modify and retrieve requirement steps
Requirement Test Coverage POST , DELETE , GET This resource lets you view, add and remove test cases from requirements.
Requirement Test Step Coverage POST , GET , DELETE This resource lets you view, add and remove test steps from requirements.
Requirement Type GET This resource lets you retrieve the list of requirement types in the system
Saved Filters GET This resource lets you retrieve the saved filters for a user
Source Code GET This resource lets you view changes and code in linked source code repositories
Source Code File GET This resource lets you view the source code files
Source Code Folder GET This resource lets you view the source code folders
Source Code Revision POST , GET This resource lets you view the revisions in linked source code repositories
Subscriptions POST , DELETE , GET This resource lets you view subscribed items as well as subscribe/unsubscribe to artifacts
System GET This resource contains information on the overall product instance, including version and settings information
Task POST , GET , PUT , DELETE This resource allows you to retrieve, create, modify and delete tasks in a specific project in the system.
Task Comment GET , POST This resource allows you to add and retrieve task comments in the system
Task Folder GET , POST , DELETE , PUT This resource allows you to retrieve, create, modify and delete task folders in the project
Task Status GET This resource lets you retrieve the list of Task statuses in the system
Task Type GET This resource lets you retrieve the list of Task types in the system
Test Case POST , GET , PUT , DELETE This resource allows you to retrieve, create, modify and delete test cases in a specific project in the system.
Test Case Comment GET , POST This resource lets you add and view comments associated with test cases
Test Case Folder GET , POST , DELETE , PUT This resource allows you to retrieve, create, modify and delete test case folders in the project
Test Case Folder Test Cases GET , POST This resources lets you retrieve test cases and count test cases by their containing folder
Test Case Link POST This resource lets you add linked test cases to a test case
Test Case Parameter POST , GET This resource allows you to add/remove parameters to test cases
Test Case Status GET This resource lets you retrieve the list of Test Case statuses in the system
Test Case Type GET This resource lets you retrieve the list of Test Case types in the system
Test Configuration Set GET This resource lets you retrieve test configuration sets
Test Run GET , POST , DELETE This resource allows you to retrieve, create, modify and delete test runs in a specific project in the system.
Test Set POST , GET , PUT , DELETE This resource lets you create, view, edit and delete test sets in the system
Test Set Comment GET , POST This resource lets you add and view comments associated with test sets
Test Set Folder POST , GET , DELETE , PUT This resource lets you create, view, edit and delete test set folders in the system
Test Set Folder Test Sets GET , POST This resources lets you retrieve test sets and count test sets by their containing folder
Test Set Parameter GET This resource lets you the retrieve test parameter values associated with test sets
Test Set Test Case GET , POST , DELETE This resource lets you create, view, modify the test cases associated with test sets
Test Set Test Case Parameter GET This resource lets you retrieve the test parameter values associated with the test cases inside a test set
Test Step POST , DELETE , GET , PUT This resource lets you create and delete test steps from test cases in the system
Test Step Parameter GET This resource lets you retrieve the parameters associated with a specific test step
Test Step Requirements Coverage GET
User POST , GET , DELETE , PUT This resource lets you create, retrieve and delete users in the system
User Contact GET , POST , DELETE This resource lets you view a list of contacts, add a contact and remove one

Resources Details

Artifact Documents

URI Method Description
projects/{project_id}/artifact-types/{artifact_type_id}/artifacts/{artifact_id}/documents GET Retrieves the list of documents/attachments in a project attached to a specific artifact
projects/{project_id}/artifact-types/{artifact_type_id}/artifacts/{artifact_id}/documents/{document_id} POST Adds an existing attachment to the specified artifact.
projects/{project_id}/artifact-types/{artifact_type_id}/artifacts/{artifact_id}/documents/{document_id} DELETE Deletes an attachment from an artifact. The attachment will still remain in the project
Export to Rapise .REST File

Association

URI Method Description
projects/{project_id}/associations POST Adds a new association in the system
projects/{project_id}/associations PUT Updates the specified Association's information
projects/{project_id}/associations/{artifact_type_id}/{artifact_id} GET Retrieves a set of associations to the specified artifact
Export to Rapise .REST File

Automated Test Run

URI Method Description
projects/{project_id}/test-runs/{test_run_id}/automated GET Retrieves a single automated test run in the system including the automation-specific information
projects/{project_id}/test-runs/automated?starting_row={starting_row}&number_of_rows={number_of_rows}&sort_field={sort_field}&sort_direction={sort_direction} GET Retrieves a list of automated test runs in the project
projects/{project_id}/test-runs/create/automation_host/{automation_host_token} POST Creates a shell set of test runs for an external automated test runner based on the provided automation host token and the specified date range
projects/{project_id}/test-runs/create/test_set/{test_set_id}/automation_host/{automation_host_token} POST Creates a shell set of test runs for an external automated test runner based on the provided test set id
projects/{project_id}/test-runs/record POST Records the results of executing an automated test
projects/{project_id}/test-runs/record-multiple POST Records the results of executing multiple automated tests
projects/{project_id}/test-runs/search/automated?starting_row={starting_row}&number_of_rows={number_of_rows}&sort_field={sort_field}&sort_direction={sort_direction} POST Retrieves a list of automated test runs in the system that match the provided filter/sort
Export to Rapise .REST File

Automation Engine

URI Method Description
automation-engines POST Creates a new Automation Engine in the system.
automation-engines PUT Updates an existing automation engine in the system
automation-engines/{automation_engine_id} GET Retrieves a single automation engine record by its ID
automation-engines/tokens{token} GET Retrieves a single automation engine record by its Token
automation-engines?active_only={active_only} GET Retrieves the list of automation engines in the system
Export to Rapise .REST File

Automation Host

URI Method Description
projects/{project_id}/automation-hosts GET Retrieves the list of all the automation hosts in the current project
projects/{project_id}/automation-hosts POST Creates a new automation host in the system
projects/{project_id}/automation-hosts PUT Updates an automation host in the system
projects/{project_id}/automation-hosts/{automation_host_id} GET Retrieves a single automation host by its id
projects/{project_id}/automation-hosts/{automation_host_id} DELETE Deletes a automation host in the system
projects/{project_id}/automation-hosts/search?starting_row={starting_row}&number_of_rows={number_of_rows}&sort_field={sort_field}&sort_direction={sort_direction} POST Retrieves the list of automation hosts in the current project
projects/{project_id}/automation-hosts/tokens/{token} GET Retrieves a single automation host by its token name
Export to Rapise .REST File

Component

URI Method Description
projects/{project_id}/components POST Creates a new component in the current project
projects/{project_id}/components/{component_id} PUT Updates an existing component in the current project
projects/{project_id}/components/{component_id} DELETE Deletes a component in the current project
projects/{project_id}/components/{component_id} GET Retrieves a single component by its ID
projects/{project_id}/components/{component_id}/undelete POST Undeletes a component in the current project
projects/{project_id}/components?active_only={active_only}&include_deleted={include_deleted} GET Retrieves a list of all the components in the current project
Export to Rapise .REST File

Custom List

URI Method Description
projects/{project_id}/custom-lists POST Adds a new custom list into the project
projects/{project_id}/custom-lists GET Retrieves all the custom lists in the current project
projects/{project_id}/custom-lists/{custom_list_id} GET Retrieves a custom list by its ID, including any custom list values
projects/{project_id}/custom-lists/{custom_list_id} PUT Updates a custom list and any associated values in the system
Export to Rapise .REST File

Custom List Value

URI Method Description
projects/{project_id}/custom-lists/{custom_list_id}/values POST Adds a new custom property list value into the system
Export to Rapise .REST File

Custom Property

URI Method Description
projects/{project_id}/custom-properties/{artifact_type_name} GET Retrieves the list of custom properties configured for the current project and the specified artifact type
projects/{project_id}/custom-properties/{custom_property_id} PUT Updates a custom property definition, including any associated options
projects/{project_id}/custom-properties/{custom_property_id} DELETE Deletes a custom property definition from the system, including any associated options
projects/{project_id}/custom-properties?custom_list_id={custom_list_id} POST Adds a new custom property definition to the project for the specified artifact type
Export to Rapise .REST File

Data Mapping Artifacts

URI Method Description
data-mappings/{data_sync_system_id}/artifacts/{artifact_type_id}/search POST Retrieves a list of data mappings for a specific artifact across all projects in the system that the authenticated user has permissions to view
projects/{project_id}/data-mappings/{data_sync_system_id}/artifacts/{artifact_type_id} GET Retrieves a list of data mappings for artifact ids in the system
projects/{project_id}/data-mappings/{data_sync_system_id}/artifacts/{artifact_type_id} POST Adds new artifact data mapping entries
projects/{project_id}/data-mappings/{data_sync_system_id}/artifacts/{artifact_type_id} DELETE Removes existing artifact data mapping entries
Export to Rapise .REST File

Data Mapping Custom Properties

URI Method Description
projects/{project_id}/data-mappings/{data_sync_system_id}/artifacts/{artifact_type_id}/custom-properties/{custom_property_id} GET Retrieves the data mapping for a custom property
Export to Rapise .REST File

Data Mapping Custom Property Values

URI Method Description
projects/{project_id}/data-mappings/{data_sync_system_id}/artifacts/{artifact_type_id}/custom-properties/{custom_property_id}/values GET Retrieves a list of data mappings for custom property values
Export to Rapise .REST File

Data Mapping Field Values

URI Method Description
projects/{project_id}/data-mappings/{data_sync_system_id}/field-values/{artifact_field_id} GET Retrieves a list of data mappings for artifact field values
Export to Rapise .REST File

Data Mapping Projects

URI Method Description
data-mappings/{data_sync_system_id}/projects GET Retrieves a list of data mappings for projects in the system
Export to Rapise .REST File

Data Mapping Users

URI Method Description
data-mappings/{data_sync_system_id}/users POST Adds new user data mapping entries
data-mappings/{data_sync_system_id}/users GET Retrieves a list of data mappings for users in the system
Export to Rapise .REST File

Data Sync

URI Method Description
data-syncs GET Retrieves a list of data-sync plug-ins that need to be synchronized with
data-syncs POST Creates a new data sync system entry
data-syncs/{data_sync_system_id} GET Retrieves a single data sync system by its ID
data-syncs/{data_sync_system_id} PUT Updates an existing data sync system entry
data-syncs/{data_sync_system_id}/failure POST Updates the status for a failed data-sync plug-in
data-syncs/{data_sync_system_id}/success POST Updates the status for a successful data-sync plug-in
data-syncs/{data_sync_system_id}/warning POST Updates the status for a data-sync plug-in that executed with warnings
Export to Rapise .REST File

Data Sync Event

URI Method Description
data-syncs/events POST Writes an error/warning event entry to the SpiraTeam database log
Export to Rapise .REST File

Document

URI Method Description
projects/{project_id}/document-folders/{folder_id}/documents/search?start_row={start_row}&number_rows={number_rows}&sort_by={sort_by} POST Retrieves a filtered list of documents/attachments in a project for the specified folder
projects/{project_id}/documents GET Retrieves a list of all the documents/attachments in a project across all folders
projects/{project_id}/documents/{document_id} DELETE Deletes an attachment from the project completely
projects/{project_id}/documents/{document_id} GET Retrieves a single project document by its id
projects/{project_id}/documents/{document_id}/open GET Returns the actual binary content of a file attachment in the system
projects/{project_id}/documents/file?filename={filename}&tags={tags}&folder_id={folder_id}&document_type_id={document_type_id}&artifact_type_id={artifact_type_id}&artifact_id={artifact_id} POST Adds a new document (file) into the system and associates it with the provided artifact (optional) and project folder/type (optional)
projects/{project_id}/documents/search?start_row={start_row}&number_rows={number_rows}&sort_by={sort_by} POST Retrieves a filtered list of documents/attachments in a project across all folders
projects/{project_id}/documents/url?url={url}&tags={tags}&folder_id={folder_id}&document_type_id={document_type_id}&artifact_type_id={artifact_type_id}&artifact_id={artifact_id} POST Adds a new document (url) into the system and associates it with the provided artifact (optional) and project folder/type (optional)
Export to Rapise .REST File

Document Folder

URI Method Description
projects/{project_id}/document-folders GET Retrieves a list of all the document folders in the current project
projects/{project_id}/document-folders POST Adds a new document folder into the current project
projects/{project_id}/document-folders/{folder_id} GET Retrieves the folder by the specified ID.
projects/{project_id}/document-folders/{folder_id} DELETE Deletes an existing document folder from the current project
projects/{project_id}/document-folders/{folder_id} PUT Updates the name and position of an existing folder in the project
Export to Rapise .REST File

Document Type

URI Method Description
projects/{project_id}/document-types?active_only={active_only} GET Retrieves a list of all the document types in the current project
Export to Rapise .REST File

Document Version

URI Method Description
projects/{project_id}/documents/{document_id}/versions/file?filename={filename}&version={version}&make_current={make_current} POST Adds a new version to a file attachment in the system
projects/{project_id}/documents/{document_id}/versions/url?url={url}&version={version}&make_current={make_current} POST Adds a new version to a URL attachment in the system
Export to Rapise .REST File

History

URI Method Description
projects/{project_id}/artifact-types/{artifact_type_id}/artifacts/{artifact_id}/history?start_row={start_row}&number_rows={number_rows}&sort_property={sort_property}&sort_direction={sort_direction} GET Retrieves the history of changes for a specific artifact
projects/{project_id}/artifact-types/{artifact_type_id}/artifacts/{artifact_id}/history?start_row={start_row}&number_rows={number_rows}&sort_property={sort_property}&sort_direction={sort_direction} POST Retrieves the history of changes for a specific artifact
projects/{project_id}/history/{history_change_set_id} GET Retrieves the details of a specific change made
Export to Rapise .REST File

Incident

URI Method Description
incidents GET Retrieves all incidents owned by the currently authenticated user
projects/{project_id}/incidents GET Retrieves the list of incidents in the project, ordered by the most recent. Only returns the first 500 results
projects/{project_id}/incidents POST Creates a new incident in the specified project in the system
projects/{project_id}/incidents/{incident_id} GET Retrieves a single incident in the system
projects/{project_id}/incidents/{incident_id} PUT Updates an incident already present in the system.
projects/{project_id}/incidents/{incident_id} DELETE Deletes an incident in a specific project in the system
projects/{project_id}/incidents/count GET Returns the count of the number of incidents in the project
projects/{project_id}/incidents/recent?start_row={start_row}&number_rows={number_rows}&creation_date={creation_date} GET Retrieves all new incidents added in the system since the date specified
projects/{project_id}/incidents/search?start_row={start_row}&number_rows={number_rows}&sort_by={sort_by} GET Retrieves the list of incidents in the project. This operation allows you to specify the sort column and the pagination range
projects/{project_id}/incidents/search?start_row={start_row}&number_rows={number_rows}&sort_by={sort_by} POST Searches the list of incidents in the project. This operation allows you to specify a list of filters, the sort column (optional) and the pagination range
projects/{project_id}/incidents/search-by-ids?ids={incident_ids} GET Retrieves a list of incidents that match the comma-separated list of ids
Export to Rapise .REST File

Incident Comment

URI Method Description
projects/{project_id}/incidents/{incident_id}/comments GET Retrieves a list of comments that belong to the specified incident
projects/{project_id}/incidents/{incident_id}/comments POST Adds new incident comments to an incident in a project in the system
Export to Rapise .REST File

Incident Priority

URI Method Description
projects/{project_id}/incidents/priorities GET Retrieves a list of the active incident priorities for the current project
projects/{project_id}/incidents/priorities POST Creates a new incident priority in the specified project in the system
Export to Rapise .REST File

Incident Severity

URI Method Description
projects/{project_id}/incidents/severities GET Retrieves a list of the active incident severities for the current project
projects/{project_id}/incidents/severities POST Creates a new incident severity in the specified project in the system
Export to Rapise .REST File

Incident Status

URI Method Description
projects/{project_id}/incidents/statuses GET Retrieves a list of the active incident statuses for the current project
projects/{project_id}/incidents/statuses POST Creates a new incident status in the specified project in the system
projects/{project_id}/incidents/statuses/default GET Retrieves the default incident status for the current project
Export to Rapise .REST File

Incident Type

URI Method Description
projects/{project_id}/incidents/types POST Creates a new incident type in the specified project in the system
projects/{project_id}/incidents/types GET Retrieves a list of the active incident types for the current project
projects/{project_id}/incidents/types/{incident_type_id}/workflow/custom-properties?status_id={incident_status_id} GET Retrieves the list of incident custom properties and their workflow state for a given type and status/step.
projects/{project_id}/incidents/types/{incident_type_id}/workflow/fields?status_id={incident_status_id} GET Retrieves the list of incident fields and their workflow status for a given type and status/step.
projects/{project_id}/incidents/types/{incident_type_id}/workflow/transitions?status_id={incident_status_id}&is_detector={is_detector}&isOwner={is_owner} GET Will retrieve available transitions for the specied status ID for the currently logged-on user.
projects/{project_id}/incidents/types/default GET Retrieves the default incident type for the current project
Export to Rapise .REST File

Manual Test Run

URI Method Description
projects/{project_id}/test-runs/{test_run_id}/manual GET Retrieves a single manual test run in the system including any associated steps
projects/{project_id}/test-runs/create/test_set/{test_set_id} POST Creates a new test run shell from the provided test set
projects/{project_id}/test-runs/create?release_id={release_id} POST Creates a new test run shell from the provided test case(s)
projects/{project_id}/test-runs/manual?starting_row={starting_row}&number_of_rows={number_of_rows}&sort_field={sort_field}&sort_direction={sort_direction} GET Retrieves a list of manual test runs in the project
projects/{project_id}/test-runs/search/manual?starting_row={starting_row}&number_of_rows={number_of_rows}&sort_field={sort_field}&sort_direction={sort_direction} POST Retrieves a list of manual test runs in the system that match the provided filter/sort
projects/{project_id}/test-runs?end_date={end_date} PUT Saves set of test runs, each containing test run steps
Export to Rapise .REST File

Message

URI Method Description
messages GET Retrieves the IM status for the current user
messages POST Posts a new message to a specific recipient
messages/senders GET Gets the list of users and number of unread messages from them
messages/senders/{sender_user_id} DELETE Marks all the messages as read for a specific sending user
messages/unread GET Retrieves the list of unread messages
Export to Rapise .REST File

Project

URI Method Description
projects GET Retrieves a list of projects that the authenticated user has access to.
projects/{project_id} GET Retrieves a single project in the system
projects/{project_id} DELETE Deletes an existing project in the system
projects/{project_id}/refresh-caches/{release_id}?run_async={run_async} POST Refreshes the task progress and test execution status for a project. Typically this needs to be called after TestRun_RecordAutomated3(...) API calls to ensure the data in the system is consistent
projects/{project_id}/refresh-caches?run_async={run_async} POST Refreshes the task progress and test execution status for a project. Typically this needs to be called after TestRun_RecordAutomated3(...) API calls to ensure the data in the system is consistent
projects?existing_project_id={existing_project_id} POST Creates a new project in the system and makes the authenticated user owner of it. "Name" is the only required field in the body of the request (eg {"Name": "New Project"})
Export to Rapise .REST File

Project Role

URI Method Description
projects-roles GET Retrieves a list of project roles in the system
Export to Rapise .REST File

Project User

URI Method Description
projects/{project_id}/users GET Retrieves the list of active users that are members of the current project
projects/{project_id}/users POST Adds users to a project with a specific role
projects/{project_id}/users PUT Updates the user's role on a specific project
Export to Rapise .REST File

Release

URI Method Description
projects/{project_id}/releases GET Retrieves all the releases belonging to the current project
projects/{project_id}/releases POST Creates a new release in the system at the root level
projects/{project_id}/releases PUT Updates a release in the system
projects/{project_id}/releases/{parent_release_id} POST Creates a new release in the system under a specified parent release
projects/{project_id}/releases/{release_id} GET Retrieves a single release in the system
projects/{project_id}/releases/{release_id} DELETE Deletes a release in the system
projects/{project_id}/releases/{release_id}/indent POST Indents a release one position
projects/{project_id}/releases/{release_id}/move?destination_release_id={destination_release_id} POST Moves a release to another location in the hierarchy
projects/{project_id}/releases/{release_id}/outdent POST Outdents a release one position
projects/{project_id}/releases/count POST Returns the number of releases that match the filter.
projects/{project_id}/releases/search?start_row={start_row}&number_rows={number_rows} POST Retrieves a list of releases in the system that match the provided filter
Export to Rapise .REST File

Release Build

URI Method Description
projects/{project_id}/releases/{release_id}/builds GET Retrieves the list of builds that are associated with a specific Release
projects/{project_id}/releases/{release_id}/builds POST Creates a new build in the system, including any linked source code revisions
projects/{project_id}/releases/{release_id}/builds/{build_id} GET Retrieves the a single build (and associated source code revisions) by its id
Export to Rapise .REST File

Release Comments

URI Method Description
projects/{project_id}/releases/{release_id}/comments GET Retrieves comments for a specified release.
projects/{project_id}/releases/{release_id}/comments POST Creates a new comment for a release.
Export to Rapise .REST File

Release Status

URI Method Description
projects/{project_id}/releases/statuses GET Retrieves the list of release statuses in the system
Export to Rapise .REST File

Release Test Cases

URI Method Description
projects/{project_id}/releases/{release_id}/test-cases POST Maps a release to a test case, so that the test case is needs to be tested for that release
projects/{project_id}/releases/{release_id}/test-cases GET Retrieves the mapped test cases for a specific release
projects/{project_id}/releases/{release_id}/test-cases/{test_case_id} DELETE Removes a mapping entry for a specific release and test case
Export to Rapise .REST File

Release Type

URI Method Description
projects/{project_id}/releases/types GET Retrieves the list of release types in the system
projects/{project_id}/releases/types/{release_type_id}/workflow/custom-properties?status_id={release_status_id} GET Retrieves the list of release custom properties and their workflow state for a given type and status/step.
projects/{project_id}/releases/types/{release_type_id}/workflow/fields?status_id={release_status_id} GET Retrieves the list of release fields and their workflow status for a given type and status/step.
projects/{project_id}/releases/types/{release_type_id}/workflow/transitions?status_id={release_status_id}&is_creator={is_creator}&isOwner={is_owner} GET Will retrieve available transitions for the specied status ID for the currently logged-on user.
Export to Rapise .REST File

Requirement

URI Method Description
projects/{project_id}/requirements POST Creates a new requirement record in the current project at the end of the list the user has access to. Note: the indent level is set at the same as the last one in the list the user has access to
projects/{project_id}/requirements PUT Updates a requirement in the system
projects/{project_id}/requirements/{requirement_id} GET Retrieves a single requirement in the system
projects/{project_id}/requirements/{requirement_id} DELETE Deletes a requirement in the system
projects/{project_id}/requirements/{requirement_id}/indent POST Indents a requirement one position
projects/{project_id}/requirements/{requirement_id}/move POST Moves a requirement to to the last position in the hierarchy
projects/{project_id}/requirements/{requirement_id}/move/{destination_requirement_id} POST Moves a requirement to another location in the hierarchy
projects/{project_id}/requirements/{requirement_id}/outdent POST Outdents a requirement one position
projects/{project_id}/requirements/count GET Returns the number of requirements that match the filter.
projects/{project_id}/requirements/count POST Returns the number of requirements that match the filter.
projects/{project_id}/requirements/indent/{indent_position} POST Creates a new requirement record in the current project using the position offset method. In the body, the only required field is Name.
projects/{project_id}/requirements/parent/{parent_requirement_id} POST Creates a new requirement in the system. The only required field is Name.
projects/{project_id}/requirements/search?starting_row={starting_row}&number_of_rows={number_of_rows} POST Retrieves a list of requirements in the system that match the provided filter
projects/{project_id}/requirements?starting_row={starting_row}&number_of_rows={number_of_rows} GET Retrieves a list of requirements in the system
requirements GET Retrieves all requirements owned by the currently authenticated user
Export to Rapise .REST File

Requirement Comment

URI Method Description
projects/{project_id}/requirements/{requirement_id}/comments GET Retrieves comments for a specified requirement.
projects/{project_id}/requirements/{requirement_id}/comments POST Creates a new comment for a requirement.
Export to Rapise .REST File

Requirement Status

URI Method Description
projects/{project_id}/requirements/statuses GET Retrieves the list of requirement statuses in the system
Export to Rapise .REST File

Requirement Step

URI Method Description
projects/{project_id}/requirements/{requirement_id}/steps GET Retrieves a list of requirement steps
projects/{project_id}/requirements/{requirement_id}/steps PUT Updates an existing requirement step
projects/{project_id}/requirements/{requirement_id}/steps/{requirement_step_id} GET Retrieves a single requirement step by its ID
projects/{project_id}/requirements/{requirement_id}/steps/{requirement_step_id} DELETE Deletes a requirement step in the list
projects/{project_id}/requirements/{requirement_id}/steps/{source_requirement_step_id}/move?destination_requirement_step_id={destination_requirement_step_id} POST Moves a requirement step in the list
projects/{project_id}/requirements/{requirement_id}/steps?existing_requirement_step_id={existing_requirement_step_id}&creator_id={creator_id} POST Adds a requirement step to a requirement
Export to Rapise .REST File

Requirement Test Coverage

URI Method Description
projects/{project_id}/requirements/{requirement_id}/test-cases GET Retrieves the test coverage for a specific requirement
projects/{project_id}/requirements/test-cases POST Maps a requirement to a test case, so that the test case 'covers' the requirement
projects/{project_id}/requirements/test-cases DELETE Removes a coverage mapping entry for a specific requirement and test case
Export to Rapise .REST File

Requirement Test Step Coverage

URI Method Description
projects/{project_id}/requirements/{requirement_id}/test-steps GET Retrieves the list of test steps associated with a requirement
projects/{project_id}/requirements/test-steps POST Adds a test step to a requirement
projects/{project_id}/requirements/test-steps DELETE Removes a test step from a requirement
Export to Rapise .REST File

Requirement Type

URI Method Description
projects/{project_id}/requirements/types GET Retrieves the list of requirement types in the system
projects/{project_id}/requirements/types/{requirement_type_id}/workflow/custom-properties?status_id={requirement_status_id} GET Retrieves the list of requirement custom properties and their workflow state for a given type and status/step.
projects/{project_id}/requirements/types/{requirement_type_id}/workflow/fields?status_id={requirement_status_id} GET Retrieves the list of requirement fields and their workflow status for a given type and status/step.
projects/{project_id}/requirements/types/{requirement_type_id}/workflow/transitions?status_id={requirement_status_id}&is_creator={is_creator}&isOwner={is_owner} GET Will retrieve available transitions for the specied status ID for the currently logged-on user.
Export to Rapise .REST File

Saved Filters

URI Method Description
saved-filters GET Retrieves the list of saved filters for the current user
Export to Rapise .REST File

Source Code

URI Method Description
projects/{project_id}/source-code GET Retrieves a list of source code branches in the project
Export to Rapise .REST File

Source Code File

URI Method Description
projects/{project_id}/source-code/{branch_id}/files/{file_id} GET Retrieves a specific file by its ID
projects/{project_id}/source-code/{branch_id}/files/{file_id}/open?revision_id={revision_id} GET Returns the physical contents of a file in a linked source code repository
projects/{project_id}/source-code/{branch_id}/files?artifact_type_id={artifact_type_id}&artifact_id={artifact_id} GET Retrieves a list of files associated with a specific artifact
projects/{project_id}/source-code/{branch_id}/folders/{folder_id}/files GET Retrieves a list of files in a specific folder
projects/{project_id}/source-code/{branch_id}/revisions/{revision_id}/files GET Retrieves a list of files contained in a specific revision
Export to Rapise .REST File

Source Code Folder

URI Method Description
projects/{project_id}/source-code/{branch_id}/folders?parent_folder_id={parent_folder_id} GET Retrieves a list of folders by their parent (unless root)
Export to Rapise .REST File

Source Code Revision

URI Method Description
projects/{project_id}/source-code/{branch_id}/files/{file_id}/revisions GET Retrieves a list of revisions for a specific file
projects/{project_id}/source-code/{branch_id}/revisions/{revision_id} GET Retrieves a revision by its ID
projects/{project_id}/source-code/{branch_id}/revisions/{revision_id}/associations GET Retrieves a list of artifacts associated with a specific revision
projects/{project_id}/source-code/{branch_id}/revisions?artifact_type_id={artifact_type_id}&artifact_id={artifact_id} GET Retrieves a list of revisions associated with a specific artifact
projects/{project_id}/source-code/{branch_id}/revisions?start_Row={start_Row}&number_rows={number_rows}&sort_property={sort_property}&sort_direction={sort_direction} POST Retrieves a sorted, filtered, paginated list of revisions in the repository
Export to Rapise .REST File

Subscriptions

URI Method Description
projects/{project_id}/artifact-types/{artifact_type_id}/artifacts/{artifact_id}/subscriptions POST Subscribes to a specified artifact
projects/{project_id}/artifact-types/{artifact_type_id}/artifacts/{artifact_id}/subscriptions DELETE Unsubscribes from a specified artifact
projects/{project_id}/artifact-types/{artifact_type_id}/artifacts/{artifact_id}/subscriptions GET Retrieves a list of all the users subscribed to an artifact
subscriptions GET Retrieves a list of all the items the current user is subscribed to (all projects)
Export to Rapise .REST File

System

URI Method Description
system/product-version GET Retrieves the version number of the current installation.
Export to Rapise .REST File

Task

URI Method Description
projects/{project_id}/tasks POST Creates a new task in the system
projects/{project_id}/tasks PUT Updates a task in the system
projects/{project_id}/tasks/{task_id} GET Retrieves a single task in the system
projects/{project_id}/tasks/{task_id} DELETE Deletes a task in the system
projects/{project_id}/tasks/count GET Returns the number of tasks in the project.
projects/{project_id}/tasks/count POST Returns the number of tasks that match the filter.
projects/{project_id}/tasks/new?creation_date={creation_date}&start_row={start_row}&number_of_rows={number_of_rows} GET Retrieves all new tasks added in the system since the date specified
projects/{project_id}/tasks?starting_row={starting_row}&number_of_rows={number_of_rows}&sort_field={sort_field}&sort_direction={sort_direction} POST Retrieves a list of tasks in the system that match the provided filter/sort
tasks GET Retrieves all tasks owned by the currently authenticated user
Export to Rapise .REST File

Task Comment

URI Method Description
projects/{project_id}/tasks/{task_id}/comments GET Retrieves comments for a specified task.
projects/{project_id}/tasks/{task_id}/comments POST Creates a new comment for a task.
Export to Rapise .REST File

Task Folder

URI Method Description
projects/{project_id}/task-folders GET Retrieves all of the task folders in the project with their hierarchy
projects/{project_id}/task-folders POST Creates a new task folder in the system
projects/{project_id}/task-folders PUT Updates a test folder in the system
projects/{project_id}/task-folders/{parent_task_folder_id}/children GET Retrieves a list of folders by the parent folder
projects/{project_id}/task-folders/{task_folder_id} GET Retrieves a single test folder in the system
projects/{project_id}/task-folders/{task_folder_id} DELETE Deletes a task folder in the system
Export to Rapise .REST File

Task Status

URI Method Description
projects/{project_id}/tasks/statuses GET Retrieves the list of task statuses in the system
Export to Rapise .REST File

Task Type

URI Method Description
projects/{project_id}/tasks/types GET Retrieves the list of task types in the system
projects/{project_id}/tasks/types/{task_type_id}/workflow/custom-properties?status_id={task_status_id} GET Retrieves the list of task custom properties and their workflow state for a given type and status/step.
projects/{project_id}/tasks/types/{task_type_id}/workflow/fields?status_id={task_status_id} GET Retrieves the list of task fields and their workflow status for a given type and status/step.
projects/{project_id}/tasks/types/{task_type_id}/workflow/transitions?status_id={task_status_id}&is_creator={is_creator}&isOwner={is_owner} GET Will retrieve available transitions for the specied status ID for the currently logged-on user.
Export to Rapise .REST File

Test Case

URI Method Description
projects/{project_id}/test-cases POST Creates a new test case in the system. Name, TestCaseStatusId, and TestCaseTypeId are required fields.
projects/{project_id}/test-cases PUT Updates a test case in the system together with its test steps (if populated)
projects/{project_id}/test-cases/{test_case_id} GET Retrieves a single test case in the system
projects/{project_id}/test-cases/{test_case_id} DELETE Deletes a test case in the system
projects/{project_id}/test-cases/{test_case_id}/add-update-automation-script?automation_engine_id={automation_engine_id}&url_or_filename={url_or_filename}&description={description}&version={version}&project_attachment_type_id={project_attachment_type_id}&project_attachment_folder_id={project_attachment_folder_id} POST Adds or updates the automation test script associated with a test case
projects/{project_id}/test-cases/{test_case_id}/move?test_case_folder_id={test_case_folder_id} POST Moves a test case to another location in the hierarchy
projects/{project_id}/test-cases/count?release_id={release_id} GET Returns the number of test cases in the project
projects/{project_id}/test-cases/count?release_id={release_id} POST Returns the number of test cases that match the filter.
projects/{project_id}/test-cases/search?starting_row={starting_row}&number_of_rows={number_of_rows}&sort_field={sort_field}&sort_direction={sort_direction}&release_id={release_id} POST Retrieves a list of testCases in the system that match the provided filter
projects/{project_id}/test-cases?starting_row={starting_row}&number_of_rows={number_of_rows}&sort_field={sort_field}&sort_direction={sort_direction}&release_id={release_id} GET Retrieves a list of testCases in the project
test-cases GET Retrieves all testCases owned by the currently authenticated user
Export to Rapise .REST File

Test Case Comment

URI Method Description
projects/{project_id}/test-cases/{test_case_id}/comments GET Retrieves comments for a specified test case.
projects/{project_id}/test-cases/{test_case_id}/comments POST Creates a new comment for a test case.
Export to Rapise .REST File

Test Case Folder

URI Method Description
projects/{project_id}/test-folders GET Retrieves all of the test case folders in the project with their hierarchy
projects/{project_id}/test-folders POST Creates a new test case folder in the system
projects/{project_id}/test-folders PUT Updates a test folder in the system
projects/{project_id}/test-folders/{parent_test_case_folder_id}/children?release_id={release_id} GET Retrieves a list of folders by the parent folder
projects/{project_id}/test-folders/{test_case_folder_id} GET Retrieves a single test folder in the system
projects/{project_id}/test-folders/{test_case_folder_id} DELETE Deletes a test case folder in the system
Export to Rapise .REST File

Test Case Folder Test Cases

URI Method Description
projects/{project_id}/test-folders/{test_case_folder_id}/test-cases/search?starting_row={starting_row}&number_of_rows={number_of_rows}&sort_field={sort_field}&sort_direction={sort_direction}&release_id={release_id} POST Retrieves a list of testCases in the system that match the provided filter
projects/{project_id}/test-folders/{test_case_folder_id}/test-cases?starting_row={starting_row}&number_of_rows={number_of_rows}&sort_field={sort_field}&sort_direction={sort_direction}&release_id={release_id} GET Retrieves a list of test cases in the specified test case folder
projects/{project_id}/test-folders/{test_folder_id}/count?release_id={release_id} GET Gives a count of items within the given folder
projects/{project_id}/test-folders/{test_folder_id}/count?release_id={release_id} POST Gives a count of items within the given folder that match the filters.
Export to Rapise .REST File

Test Case Link

URI Method Description
projects/{project_id}/test-cases/{test_case_id}/test-links/{linked_test_case_id}?position={position} POST Adds a new test step that is actually a link to a test case
Export to Rapise .REST File

Test Case Parameter

URI Method Description
projects/{project_id}/test-cases/{test_case_id}/parameters GET Retrieves the list of defined parameters for a test case along with the associated default value
projects/{project_id}/test-cases/parameters POST Adds a new parameter for a test case
projects/{project_id}/test-cases/parameters/create-token?parameter_name={parameter_name} POST Returns the full token of a test case parameter from its name
Export to Rapise .REST File

Test Case Status

URI Method Description
projects/{project_id}/test-cases/statuses GET Retrieves the list of testCase statuses in the system
Export to Rapise .REST File

Test Case Type

URI Method Description
projects/{project_id}/test-cases/types GET Retrieves the list of testCase types in the system
projects/{project_id}/test-cases/types/{test_case_type_id}/workflow/custom-properties?status_id={test_case_status_id} GET Retrieves the list of testCase custom properties and their workflow state for a given type and status/step.
projects/{project_id}/test-cases/types/{test_case_type_id}/workflow/fields?status_id={test_case_status_id} GET Retrieves the list of testCase fields and their workflow status for a given type and status/step.
projects/{project_id}/test-cases/types/{test_case_type_id}/workflow/transitions?status_id={test_case_status_id}&is_creator={is_creator}&isOwner={is_owner} GET Will retrieve available transitions for the specied status ID for the currently logged-on user.
Export to Rapise .REST File

Test Configuration Set

URI Method Description
projects/{project_id}/test-configuration-sets GET Retrieves the list of test configuration sets in the current project (without the detailed entries)
projects/{project_id}/test-configuration-sets/{test_configuration_set_id} GET Retrieves the test configuration set by its id
Export to Rapise .REST File

Test Run

URI Method Description
projects/{project_id}/test-cases/{test_case_id}/test-runs/search?starting_row={starting_row}&number_of_rows={number_of_rows}&sort_field={sort_field}&sort_direction={sort_direction} POST Retrieves a list of test runs for a specific test case
projects/{project_id}/test-runs/{test_run_id} GET Retrieves a single test run in the system. Only returns the generic information that is applicable for both automated and manual tests. Consider using TestRun_RetrieveAutomatedById or TestRun_RetrieveManualById if you need the automation/manual specific data for the test run
projects/{project_id}/test-runs/{test_run_id} DELETE Deletes a test run from the system
projects/{project_id}/test-runs/count GET Returns the number of test runs in the project.
projects/{project_id}/test-runs/count POST Returns the number of test runs that match the filter.
projects/{project_id}/test-runs/search?starting_row={starting_row}&number_of_rows={number_of_rows}&sort_field={sort_field}&sort_direction={sort_direction} POST Retrieves a list of test runs in the system that match the provided filter/sort
projects/{project_id}/test-runs?starting_row={starting_row}&number_of_rows={number_of_rows}&sort_field={sort_field}&sort_direction={sort_direction} GET Retrieves a list of test runs in the project
Export to Rapise .REST File

Test Set

URI Method Description
projects/{project_id}/test-sets POST Creates a new test set in the system. You must send at least the "Name" (string), "Description" (string), "TestSetStatusId" (integer between 1 and 5), and "TestRunTypeId" (integer between 1 and 2) fields in the body
projects/{project_id}/test-sets/ PUT Updates a test set in the system
projects/{project_id}/test-sets/{test_set_id} GET Retrieves a single test set in the system
projects/{project_id}/test-sets/{test_set_id} DELETE Deletes a test set in the system
projects/{project_id}/test-sets/{test_set_id}/move?test_set_folder_id={test_set_folder_id} POST Moves a test set to another location in the hierarchy
projects/{project_id}/test-sets/{test_set_id}/test-configuration-sets GET Retrieves the test configuration set associated with the given test set, or NULL if none associated
projects/{project_id}/test-sets/count?release_id={release_id} GET Returns the number of test sets in the project
projects/{project_id}/test-sets/count?release_id={release_id} POST Returns the number of test sets that match the filter.
projects/{project_id}/test-sets/search?starting_row={starting_row}&number_of_rows={number_of_rows}&release_id={release_id}&sort_field={sort_field}&sort_direction={sort_direction} POST Retrieves a list of testSets in the system that match the provided filter
projects/{project_id}/test-sets?starting_row={starting_row}&number_of_rows={number_of_rows}&sort_field={sort_field}&sort_direction={sort_direction}&release_id={release_id} GET Retrieves a list of testSets in the project
test-sets GET Retrieves all testSets owned by the currently authenticated user
Export to Rapise .REST File

Test Set Comment

URI Method Description
projects/{project_id}/test-sets/{test_set_id}/comments GET Retrieves comments for a specified test set.
projects/{project_id}/test-sets/{test_set_id}/comments POST Creates a new comment for a test set.
Export to Rapise .REST File

Test Set Folder

URI Method Description
projects/{project_id}/test-set-folders POST Creates a new test set folder in the system
projects/{project_id}/test-set-folders PUT Updates a test folder in the system
projects/{project_id}/test-set-folders GET Retrieves all of the test set folders in the project with their hierarchy
projects/{project_id}/test-set-folders/{parent_test_set_folder_id}/children?release_id={release_id} GET Retrieves a list of folders by the parent folder
projects/{project_id}/test-set-folders/{test_set_folder_id} GET Retrieves a single test folder in the system
projects/{project_id}/test-set-folders/{test_set_folder_id} DELETE Deletes a test set folder in the system
Export to Rapise .REST File

Test Set Folder Test Sets

URI Method Description
projects/{project_id}/test-set-folders/{test_folder_id}/count?release_id={release_id} GET Gives a count of items within the given folder
projects/{project_id}/test-set-folders/{test_folder_id}/count?release_id={release_id} POST Gives a count of items within the given folder that match the filters.
projects/{project_id}/test-set-folders/{test_set_folder_id}/test-sets/search?starting_row={starting_row}&number_of_rows={number_of_rows}&sort_field={sort_field}&sort_direction={sort_direction}&release_id={release_id} POST Retrieves a list of testSets in the system that match the provided filter
projects/{project_id}/test-set-folders/{test_set_folder_id}/test-sets?starting_row={starting_row}&number_of_rows={number_of_rows}&sort_field={sort_field}&sort_direction={sort_direction}&release_id={release_id} GET Retrieves a list of testSets in the project
Export to Rapise .REST File

Test Set Parameter

URI Method Description
projects/{project_id}/test-sets/{test_set_id}/parameters GET Retrieves a list of test parameter values specified by a specific test set
Export to Rapise .REST File

Test Set Test Case

URI Method Description
projects/{project_id}/test-sets/{test_set_id}/test-case-mapping GET Retrieves all the test cases that are part of a test set
projects/{project_id}/test-sets/{test_set_id}/test-case-mapping/{test_case_id}?owner_id={owner_id}&existing_test_set_test_case_id={existing_test_set_test_case_id} POST Maps a test set to a test case, so that the test case is part of the test set
projects/{project_id}/test-sets/{test_set_id}/test-cases GET Retrieves all the test cases that are part of a test set
projects/{project_id}/test-sets/{test_set_id}/test-cases/{test_set_test_case_id} DELETE Removes a test case from a test set
Export to Rapise .REST File

Test Set Test Case Parameter

URI Method Description
projects/{project_id}/test-sets/{test_set_id}/test-cases/{test_set_test_case_id}/parameters GET Retrieves a list of test parameter values specified by a specific test set's test case instance
Export to Rapise .REST File

Test Step

URI Method Description
projects/{project_id}/test-cases/{test_case_id}/test-steps POST Adds a new test step to the specified test case
projects/{project_id}/test-cases/{test_case_id}/test-steps GET Retrieves the list of test steps for a test case
projects/{project_id}/test-cases/{test_case_id}/test-steps PUT Updates a single test step in the system
projects/{project_id}/test-cases/{test_case_id}/test-steps/{source_test_step_id}/move?destination_test_step_id={destination_test_step_id} POST Moves a test step to a different position in the test case
projects/{project_id}/test-cases/{test_case_id}/test-steps/{test_step_id} DELETE Deletes a test step in the system
projects/{project_id}/test-cases/{test_case_id}/test-steps/{test_step_id} GET Retrieves a single test step by its ID
Export to Rapise .REST File

Test Step Parameter

URI Method Description
projects/{project_id}/test-cases/{test_case_id}/test-steps/{test_step_id}/parameters GET Retrieves the list of parameters and provided values for a test link step
Export to Rapise .REST File

Test Step Requirements Coverage

URI Method Description
projects/{project_id}/test-steps/{test_step_id}/requirements GET Retrieves a list of the requirement ids mapped against a specific test step
Export to Rapise .REST File

User

URI Method Description
users GET Retrieves the details of the current, authenticated user
users/{user_id} GET Retrieves a single user in the system
users/{user_id} DELETE Tries to delete the specified user ID. Note that this function will fail if any other foreign keys (fields) in other tables are assigned to the user that is specified.) Must be connected to the API as the root Administrator.
users/{user_id} PUT Updates an existing user in the system
users/all GET Retrieves a list of all the active users in the system (all projects)
users/usernames/{user_name}?include_inactive={include_inactive} GET Retrieves a single user in the system by user-name
users?password={password}&password_question={password_question}&password_answer={password_answer}&project_id={project_id}&project_role_id={project_role_id} POST Creates a new user in the system and adds them to the current project as the specified role
Export to Rapise .REST File

User Contact

URI Method Description
users/contacts GET Retrieves the list of contacts for the current user
users/contacts/{user_id} POST Adds a user as a contact
users/contacts/{user_id} DELETE Removes a user as a contact
Export to Rapise .REST File